Home > Rotary Paddle Level Switch >

Leaf Blade Foldable Rotary Paddle Level Switch 1.6MPa Rotating Paddle Level Switch

Product Categories

Radar Level Transmitter [435]
Ultrasonic Level Transmitter [95]
Magnetic Level Transmitter [59]
Pressure Sensor Transmitter [137]
Tuning Fork Density Meter [31]
Tuning Fork Level Switch [89]
RF Admittance Level Switch [53]
Rotary Paddle Level Switch [40]
Temperature Transmitter Sensor [29]
Mass Flow Meter [16]
Turbine Flow Meter [49]
Electromagnetic Flow Meter [49]
Ultrasonic Flow Meter [13]
Magnetostrictive Level Gauge [48]
RF Admittance Level Transmitter [85]

Xi'an Dehou Electronic Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Leaf Blade Foldable Rotary Paddle Level Switch 1.6MPa Rotating Paddle Level Switch

Name: Leaf Blade Foldable Rotary Paddle Level Switch 16MPa Rotating Paddle Level Switch
Brand: NUOYINGJIAYE
Price: 100 USD

Wholesale Leaf Blade Foldable Rotary Paddle Level Switch 1.6MPa Rotating Paddle Level Switch from china suppliers

Brand Name : NUOYINGJIAYE

Model Number : NYZX（Leaf Blade Can Be Folded）

Certification : Explosion-proof certificate

Place of Origin : China

MOQ : 1

Price : $100 to $380

Payment Terms : T/T

Supply Ability : 400 pcs/ pre month

Delivery Time : 3 work days

Packaging Details : 80cm×17cm×24cm

Probe rod length : 200mm (customizable as required)

Power supply : 24VDC, 220VAC (optional)

Material : 304，316 (optional)

Process connection : Thread, flange (optional)

Process pressure : 0~ 1.6MPa

Operating temperature : -40 - +80 °C (> +80 °C customizable)

Protection grade : IP67

Explosion-proof grade : Exia IICT6 (optional)

Contact Now

NYZX ( Leaf Blade Can Be Folded )Resistive Level Switch

NYZX Resistive Level Switch Operating Principle

The NYZX series resistance rotary material level switch is the use of micro motor as a driving device, the drive shaft is connected with the clutch, when there is no contact with the material, the motor runs normally, when the blade contact with the material, the motor stops rotating, the detection device output a contact signal, at the same time cut off the power to stop rotating. When the material falls, the resistance of the blade disappears and the detection device returns to the original state by torsion spring. For different specific gravity material torque size can be adjusted.

NYZX Resistive Level SwitchTechnical Parameter

Applications	powder, small particle level control
Bar material	304,316 (optional)
Probe length	200mm (customizable as required)
Power supply	24VDC,220VAC (optional)
Process temperature	-40 - +80 °C (> +80 °C customizable)
Process pressure	normal pressure,0~ 1.6MPa
Process connection	thread, flange (optional)
Dielectric density	N 0.4g/cm3
Insulation impedance	N 100MKQ (500VDC)
Dielectric strength	1500V lmin
Contact capacity	250V 5A (SPDT)
Moment	10kgm (lNm)
Power	3.0W
Electrical interface	3/4 nNPT
Shell material	Aluminium (optional)
Level of protection	IP67
Anti-hazard classification	Exia II CT 6 (optional)

※ Note: Products can be customized according to the specific requirements of users!

Leaf Blade Foldable Rotary Paddle Level Switch 1.6MPa Rotating Paddle Level Switch

NYZX Resistive Level Switch Installation requirements

Confirm material specific gravity to select blade.
Confirm installation method and size.
Please choose the high temperature serieswhen the temperature in the barrel is over 80°C.
Stop switch junction box outlet must be down, cable fixed screw mother must be locked.
When the continuous position is 1 "thread, the sickle blade can be selected so that it can be locked directly into the tube tooth.1'
The controller can be installed at ahorizontal angle of 15°C-20°C to reduce the impact on the material.
Shaft length adjustable type and steel cable type only suitable for top mounting.
The rotary resistance switch should avoid being installed directly under the blanking opening.
When there is no way to avoid it, a steel plate can be welded on the top wall of the product to reduce
the impact of the material product and prevent the material impact from causing misoperation.
The torsion spring is used to adjust the output torsion of the rotating shaft. When the specific gravity of the
measured object is large, the spring torsion can be adjusted to the strongest position, but the blade sensitivity is
poor. On the contrary, the smaller the specific gravity of the measured object, the weaker the spring is, and the better the blade sensitivity is. (Note: The force of the torsion spring should not be replaced at will so as not to make a mistake).

Product Tags:

Leaf Blade Foldable Rotary Paddle Level Switch 1.6MPa Rotating Paddle Level Switch Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Xi'an Dehou Electronic Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!